motorized trackless transfer car for mold and die material handling equipment
The BWP series motorized trackless transfer car for mold and die material handling equipment usually,accumulator,mains powered and generator are choose as power source.The current is supplied and generator are choose as power source.The Electric Trackless Transfer Flat Car is supplied to pulling motor through electric control system,which makes the motorized trackless transfer car for mold and die material handling equipment start,stop,move background,turn around and realize other functions.Also, we will provide intelligent automatic rapid charger with the car. Positioning fixture, lift platform and other assistive device are optional to meet different demands on various occasions. The PLC is also alternative if The motorized trackless transfer car for mold and die material handling equipment is necessary.
Advantages and functions of the motorized trackless transfer car for mold and die material handling equipment
1.motorized trackless transfer flat car overall solution vendor
2.The wheels of motorized trackless transfer flat carcan turn to 180 degrees.
Accurate location of 3.motorized trackless transfer flat car 3cm Safety guarantee equipment running in place
4.motorized trackless transfer flat car conforms to JB / T6127-92 mechanical industry standard, and puts forward environmental protection and economic use plan to the society.
5.motorized trackless transfer flat car has compact structure, beautiful appearance, steady turning, strong climbing ability and long distance.
6.motorized trackless transfer flat car low noise, easy to maintain environmental protection power supply mode, positioning remote control operating steel structure skeleton, safety factor 150, load up to 300t
Detailed Image of motorized trackless transfer car for mold and die material handling equipment
The motorized trackless transfer car for mold and die material handling equipment consisted of power source,gear train,steel structure bearing frame,steering gear,running gear,control system and fault diagnosis module to better the Electric Trackless Transfer Flat Car.
Technical parameter table of motorized trackless transfer car for mold and die material handling equipment
| Rated Load(T) | 5 | 10 | 15 | 20 | 30 | 40 | 50 |
| Ground Clearance(mm) | 50 | 50 | 50 | 50 | 50 | 50 | 50 |
| Wheel Base(mm) | 1500 | 1500 | 1500 | 1700 | 1700 | 1800 | 1800 |
| Turnning Radius(mm) | 2501 | 3101 | 3401 | 3901 | 4301 | 4801 | 5201 |
| Axles Distance(mm) | 2500 | 3100 | 3400 | 3900 | 4300 | 4800 | 5200 |
| Motor Power(Kw) | 3.5 | 5 | 6 | 7 | 10 | 12 | 15 |
| Running Speed(m/min) | 0-15 | 0-15 | 0-15 | 0-15 | 0-15 | 0-12 | 0-12 |
| Cart Weight(t) | 4.3 | 5.3 | 6.6 | 7.9 | 8.8 | 10 | 10.5 |
| Impacted Rated Load(t) | 7.5 | 15 | 22.5 | 30 | 45 | 60 | 75 |
| Battery Capacity(Ah) | 180 | 160 | 180 | 180 | 250 | 300 | 330 |
| Battery Voltage(v) | 36 | 48 | 48 | 48 | 48 | 48 | 48 |
| Wheel Quantity | 4 | 4 | 4 | 4 | 44 | 4 | 4 |
| Ground Requirement | Cement Floor | Cement Floor | Cement Floor | Cement Floor | Cement Floor | Cement Floor | Cement Floor |
Application of the motorized trackless transfer car for mold and die material handling equipment
Stable and flexible during the turning in small space, we have optimized the steering mechanism, wheel press and frame rigidity to make it available for linkage of several trolleys. The Electric Trackless Transfer Flat Car-30T Capacity Towable Type Trackless-Industrial Trailer Coils and Die Industrial use Motorized Rail Die Transfer Carts has been highly approved by our customers.
Product Tags:
|
|
motorized trackless transfer car for mold and die material handling equipment Images
|
